Ls swap motor mount and clearance questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WickedDirtBag · 08-20-2013, 09:15 PM

Ok guys finally got my 5.3/4l60e combo. Pulling 350/350 combo out. Do not want to change out driveshaft or drill crossmember. If I read correctly the new trans is 1.5" longer. So I want to shift the whole shebang forward to get the trans mounts in place. Will I have clearance issues with stock fan and which mounts do I need to purchase to achieve this. I have low budget so inexpensive mounts. Oh and I don't want to change motor mount towers either. Thanks guys can't wait to get it up and runnin.
Posted via Mobile Device

08-20-2013, 09:15 PM	#1
WickedDirtBag Registered User Join Date: May 2013 Location: Clear Lake , WI Posts: 17	Ls swap motor mount and clearance questions Ok guys finally got my 5.3/4l60e combo. Pulling 350/350 combo out. Do not want to change out driveshaft or drill crossmember. If I read correctly the new trans is 1.5" longer. So I want to shift the whole shebang forward to get the trans mounts in place. Will I have clearance issues with stock fan and which mounts do I need to purchase to achieve this. I have low budget so inexpensive mounts. Oh and I don't want to change motor mount towers either. Thanks guys can't wait to get it up and runnin. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.