Intake & Carb Install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

77ChevySharkBite · 09-26-2013, 05:35 PM

Okay fellas I need some knowledge once again!

I just got my goodies a Edelbrock 1406 Carb and Edelbrock EPS Performer Intake. Alright so I'm going to be doing this install possibly myself if you have pictures to help that would be great to!

The kit I bought came with everything just need a couple minor things, like sealant, some fittings, and heater hose fitting that's it from what I can tell.

It's going on a small block chevy 350, I'm going to use the stock thermostat. What all do I need to replace or add, I do live in Texas no smog equipment required. Do I need a fuel filter for it? I'm going to also be buying some plugs because there are holes that I see I wont use.

Any advise is welcome and thank you as always for helping me learn!

09-26-2013, 05:35 PM	#1
77ChevySharkBite Registered User Join Date: Aug 2012 Location: Houston, Texas Posts: 2,475	Intake & Carb Install Okay fellas I need some knowledge once again! I just got my goodies a Edelbrock 1406 Carb and Edelbrock EPS Performer Intake. Alright so I'm going to be doing this install possibly myself if you have pictures to help that would be great to! The kit I bought came with everything just need a couple minor things, like sealant, some fittings, and heater hose fitting that's it from what I can tell. It's going on a small block chevy 350, I'm going to use the stock thermostat. What all do I need to replace or add, I do live in Texas no smog equipment required. Do I need a fuel filter for it? I'm going to also be buying some plugs because there are holes that I see I wont use. Any advise is welcome and thank you as always for helping me learn! __________________ Korwin 77 C10 Silverado Sharkbite LWB Build 67 Chevy C10 Frame Off 06 Dodge Magnum 2.7v6 aka swag wag! 2010 Honda Accord 2.4I4 DD aka Liquid Metal



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.