John Lee's HEI Swap for an I6, (Measuring 30+ degrees on the Factory Tab!) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network

Click Here



Register or Log In To remove these advertisements.

		The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board
John Lee's HEI Swap for an I6, (Measuring 30+ degrees on the Factory Tab!)

Site Merchandise

Prev

Previous Post

Next Post

Next

10-07-2013, 07:11 PM	#1
Sharps40 Account Suspended Join Date: Oct 2012 Location: here Posts: 2,408	John Lee's HEI Swap for an I6, (Measuring 30+ degrees on the Factory Tab!) After installing the HEI on John Lee and finding it ran great at 10 degrees initial I decided to follow Mr. Langdons instructions and set it up as high as 18 degrees initial...but how to measure accurately on the factory tab? And then I decided to measure the total advance at 3000 rpm but how to do that on the factory tab? Read on.....

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -4. The time now is 09:03 AM.