Lowered 75 C10 long bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chrisxeasy · 10-23-2013, 02:42 AM

Finally convinced myself to get a start on this monster! First off its a 75 with 81k original miles. Motor is a 350 with auto trans.

To start off I started with replacing the body panels that were rusted out, and added a rear axle flip kit and 1.5" off springs in front.
Next up is my 2.5" drop spindles and shocks from Lmc and rear shackle set with c-notch on the rear.

I am in trouble when it comes to my cab repair panels, without knowledge of welding and how exactly these are replaced. My most important task before paint.

And I am wanting to fit 22s possibly 24s depending in how wide I can go, and how low.

Anything thoughts? Please share

10-23-2013, 02:42 AM	#1
Chrisxeasy Registered User Join Date: Oct 2013 Location: Spokane, wa Posts: 25	Lowered 75 C10 long bed Finally convinced myself to get a start on this monster! First off its a 75 with 81k original miles. Motor is a 350 with auto trans. To start off I started with replacing the body panels that were rusted out, and added a rear axle flip kit and 1.5" off springs in front. Next up is my 2.5" drop spindles and shocks from Lmc and rear shackle set with c-notch on the rear. I am in trouble when it comes to my cab repair panels, without knowledge of welding and how exactly these are replaced. My most important task before paint. And I am wanting to fit 22s possibly 24s depending in how wide I can go, and how low. Anything thoughts? Please share Attached Images Last edited by Chrisxeasy; 10-23-2013 at 02:44 AM. Reason: Adding description to title



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.