Tilt column wiring harness conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NEWFISHER · 11-07-2013, 01:24 PM

There has been a lot of talk lately about column swaps and thought I would post an easy solution. 73-79 tilt columns come with a flat harness connector. Our trucks have the half moon style. There is a connector through CPP for $19.95 or get the GM O.E one ACDelco 1894851 for abot $10.00. You will have to wire up your own emergency flasher with either of these. The $35.00 ones come with a pre-wired flasher.

My column came with the body side harness cut back 6 inches which allowed me to add some standard female connectors.

.

.
.
At this point you simply shove the color coded wire into the corresponding color terminal at the half moon connector. Works like a charm for about $1
.
.
Good thread to follow here:
http://www.67-72chevytrucks.com/vboa...d.php?t=541292

11-07-2013, 01:24 PM	#1
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Tilt column wiring harness conversion There has been a lot of talk lately about column swaps and thought I would post an easy solution. 73-79 tilt columns come with a flat harness connector. Our trucks have the half moon style. There is a connector through CPP for $19.95 or get the GM O.E one ACDelco 1894851 for abot $10.00. You will have to wire up your own emergency flasher with either of these. The $35.00 ones come with a pre-wired flasher. My column came with the body side harness cut back 6 inches which allowed me to add some standard female connectors. . . . At this point you simply shove the color coded wire into the corresponding color terminal at the half moon connector. Works like a charm for about $1 . . Good thread to follow here: http://www.67-72chevytrucks.com/vboa...d.php?t=541292



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.