Lowering Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy_g · 03-12-2014, 11:09 AM

I am getting ready to lower my 51 3100. In the process of changing out the rear differential fluid I discovered that the previous owner most likely changed out the rear end and put in a rear end from a 58.

Was considering using 3" blocks in the back that I can order from chevyofthe40s.com for a 51 but I am concerned that they will not work on the 58 rear end.

Does anyone have any advice or suggestions on the blocks or other ways?

Thanks

Andy

03-12-2014, 11:09 AM	#1
Andy_g Registered User Join Date: Feb 2014 Location: Spicewood, TX Posts: 3	Lowering Question I am getting ready to lower my 51 3100. In the process of changing out the rear differential fluid I discovered that the previous owner most likely changed out the rear end and put in a rear end from a 58. Was considering using 3" blocks in the back that I can order from chevyofthe40s.com for a 51 but I am concerned that they will not work on the 58 rear end. Does anyone have any advice or suggestions on the blocks or other ways? Thanks Andy



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.