Quick help on current performance harness, trying to start

[68c20lwb]

Hello, I am trying to start my 5.3 on the engine stand in the garage. I have been struggling with this for a little while and I am stumped. I hooked up my battery negative to ground on block, battery positive to starter. I then touched my yellow/black (cranking signal) to positive and nothing. I then touched my pink/black (12V switched) and heard a relay click. I then touched both to the positive and nothing other then the relay click. I jumped my starter with a screwdriver to turn the engine over and check oil pressure, that was no problem. With my battery connections I should be able to touch my standing signal to positive and the engine should turn over correct? Am I missing something obvious here? All fuses are good, all grounds connected.

2005 5.3 everything original to the truck. Current Performance harness, speartech tune.

Thank you,

August