1980 C10 fan shroud question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dwntwn · 04-11-2014, 10:11 PM

Truck originally had a 250ci/4speed, I dropped in a 402ci BBC and have been running without a fan shroud.
If you look at the photos, the fan blade extends higher than the top panel that holds the radiator in place.

I do have a shroud from an '84 (big block truck) but that top panel is a different style than the one on my '80. LMC's part # for a big block shroud runs from '73-88, so that should work, but the fan blade is too high.

Is anyone running a big block with a factory shroud, and could you attach a photo?

Thanks in advance

04-11-2014, 10:11 PM	#1
dwntwn Registered User Join Date: Oct 2012 Location: Tucson, AZ Posts: 101	1980 C10 fan shroud question Truck originally had a 250ci/4speed, I dropped in a 402ci BBC and have been running without a fan shroud. If you look at the photos, the fan blade extends higher than the top panel that holds the radiator in place. I do have a shroud from an '84 (big block truck) but that top panel is a different style than the one on my '80. LMC's part # for a big block shroud runs from '73-88, so that should work, but the fan blade is too high. Is anyone running a big block with a factory shroud, and could you attach a photo? Thanks in advance Attached Images __________________ _____________________________________________ 1966 c10, short fleet, 402ci 700r4 1988 r20 Suburban 454ci tbi, th400 (12v Cummins soon) 1980 shovelhead, hardtail, open primary 1998 FXDWG



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.