Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-21-2014, 10:14 PM | #1 |
The Few, The Proud
Join Date: Jun 2007
Location: Ball Ground, Georgia
Posts: 1,830
|
Need some input - '80 K30 Flatbed
I'm usually over on the 67-72 side, but have been recently looking at a 1980 K30 with a flatbed and was wondering what I should be looking for. The truck would be used for trips to Home Depot and used around my deer lease primarily.
Few specs that I know.... 454 engine 4spd tranny NP205 ????? AC and speedo aren't working Dash cracked (no surprise there) I'm still getting info from the owner, but not sure what I should be asking. The truck is 120 miles from me so it's a little difficult to go look at it. I'm assuming the axles would be a Dana 60 up front and 14 bolt out back? It looks as though it has manual locking hubs intalled up front. They usually had auto locking hubs, I think? Were big blocks factory in these trucks? I'm pretty sure they were, but need confirmation. Thoughts??
__________________
Shannon Last edited by sdailey; 04-21-2014 at 10:46 PM. |
Bookmarks |
|
|