possible reason for door gap problem?... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72gmcshorty · 05-03-2014, 06:31 PM

My driver door has a problem where the gap between door and jamb is way too big. i have the top on and even with the door hinges all the way back there is still 3/16-1/4" too much gap. The part i don't get is the gap is even all the way down. We managed to get the passenger side even 3/16" gap top to bottom. I have new mounts, floors, etc. but its like the entire pillar is too far forward. I tried to put on the fender but it wont fit...This gap was also there before all the rust repair was done...any ideas? Frame out of allignment or tub somehow? Any ideas?

05-03-2014, 06:31 PM	#1
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	possible reason for door gap problem?... My driver door has a problem where the gap between door and jamb is way too big. i have the top on and even with the door hinges all the way back there is still 3/16-1/4" too much gap. The part i don't get is the gap is even all the way down. We managed to get the passenger side even 3/16" gap top to bottom. I have new mounts, floors, etc. but its like the entire pillar is too far forward. I tried to put on the fender but it wont fit...This gap was also there before all the rust repair was done...any ideas? Frame out of allignment or tub somehow? Any ideas? __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.