The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-14-2014, 11:51 PM   #11
Root2812
Registered User
 
Root2812's Avatar
 
Join Date: Aug 2011
Location: Barnum, Mn
Posts: 795
Re: Pre-LS swap questions

So I have some minor updates and a few questions I hope you guys can help me with. I still haven't fired up my 5.3 but I decided to just do a rebuild on it anyway. It has 180,000 miles and I hate leaks so I was going to change all the gaskets and seals but since I am in there I might as well do bearings and rings. Then since its all apart I might as well send it to the machine shop for a quick hone and hot tank. Its amazing how things snowball on you. Aside from that I'm just about finished with the chassis and the engine and tranny are mounted. I also got a S&P MAF/air filter from a ls1tech board member for $220 that was never used and is the chrome one so I am happy about that. He said he spent $600 on it. I had only looked at the non-chrome one and that would have been over $300 so I got a good deal.

If you remember back a while, I had gotten an LS6 intake that came broken but was replaced so I had the broken one for free. I decided to try and fix it. I know the Nylon66 is a bastard and is nearly impossible to bond to with anything so I contacted a company that specializes in plastics and plastics epoxy. They had an epoxy made for thermoplastics (Nylon 66 is one) so I paid $30 for a tube to try. That stuff is stronger than I had ever imagined and it looks like it worked. I'll give you guys a more detailed write up after I test it out. Hell, if I can fix it for $30 and sell the other one I come out a head.

I'm also starting on my harness and I got in contact with Branden at LT1swap.com for my PCM flash.

So here are my questions. Since I am swapping the LS6 intake on to a 5.3 should I use the MAP that came from the truck or from the car intake? I have both, one is the black label and the other is blue.

Anyone know a good source for the injector pigtails for the LS6 injectors? Those are EV1 right? and the truck is EV6? or is it the other way around?

thanks
__________________
My 1950 Chevy build
Root2812 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:09 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com