![]() |
![]() |
#1 |
Registered User
![]() Join Date: Jan 2012
Location: Arizona Bay
Posts: 145
|
Fan shroud questions.
What's happening out there in Square Land? I'm curious about something... Why is it that a fan shroud for a '75 1/2 ton with a sbc is damn near impossible to find? Nobody (that I know of) re-pops them and I have been unsuccessful trying to locate a good used one. What's so different about a '75 versus '73-'74 and '76-'80?
I bought a two-piece sbc shroud and upper bracket from a late 70's c10 and the shroud was almost an inch too tall?? I trimmed as much as I could off of the bottom (about a half inch) but then it was bottoming out on the chassis. The bolt holes for the upper shroud were still over a half inch higher than those for the bracket. Dafuq? Am I using incompatible parts? Here's the upper bracket: ![]() ![]() Top of the shroud: ![]() Bottom: ![]() Thanks in advance! Bob PS. Here's a pic of my '75 GMC with my Dad's '54 Chevy, just for fun ![]() ![]() |
![]() |
![]() |
Bookmarks |
|
|