![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
K5Camper
![]() Join Date: Mar 2004
Location: Pueblo, CO
Posts: 1,513
|
Stock 3-speed manual column shift lever help
Continuing the search for parts on our '59 Apache shop truck, one part I can't seem to find reproduced is the manual shift lever on the column.
Ours obviously has been used, broke, fixed and used again. It's been broken off about 2" above the lower base and was bubble gum welded back together. to top that off, the holes for the pins it pivots on are pretty wobbled out of round making the shift action loose and very "vague". So I'm making a wild swag that the lever would be the same across all years of TF trucks from 55-59. Am I right or way off base? Are there any reproductions? I've searched and came up with nothing. I'm pretty set to start looking for a good used one, but not sure if I can widen the search by years or I have to narrow it down. Thanks for the help!
__________________
Rob Z. 1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP 1991 K5 8.1L/NV4500/241/D44/14b FWC Camper |
![]() |
![]() |
Bookmarks |
|
|