Pitman arm - The 1947 - Present Chevrolet & GMC Truck Message Board Network

taylorbg · 10-29-2014, 10:15 AM

I am replacing all the steering parts on my front end. Do I need a drop pitman arm? I would rather not spend the $115 if I do not have to. Below is a picture of my truck and a picture of the existing pitman arm. I have ordered all Moog lower and upper ball joints, upper, lower, inner and outer tie rods ends, and adjustment sleeve.

I am also going to get a Leaf spring polyurethane bushing set.

Is there anything else I should replace while I am in there?

1972 4x4 Suburban

http://www.summitracing.com/parts/sj...l/k10-suburban

10-29-2014, 10:15 AM	#1
taylorbg Registered User Join Date: Nov 2013 Location: Rockwall, Texas Posts: 47	Pitman arm I am replacing all the steering parts on my front end. Do I need a drop pitman arm? I would rather not spend the $115 if I do not have to. Below is a picture of my truck and a picture of the existing pitman arm. I have ordered all Moog lower and upper ball joints, upper, lower, inner and outer tie rods ends, and adjustment sleeve. I am also going to get a Leaf spring polyurethane bushing set. Is there anything else I should replace while I am in there? 1972 4x4 Suburban http://www.summitracing.com/parts/sj...l/k10-suburban Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.