wish me luck also - The 1947 - Present Chevrolet & GMC Truck Message Board Network

krazy_texan · 01-26-2004, 01:12 AM

tommarow morning i am going to do my first engine pull on my own, i am going to transplant my 350 from my 71 c/20 to my newly aquired 67 gmc, while i am at it i also have some ?s

is it safe to pull the engine and tranny all at once what should i do before doing this.

since i am doing this on my own i thought about taking the hood hinges off of the front clip and unbolting it from the truck and use the engine hoist to lift off the front clip, would i be able to do this. I am also going to scoot the cab forward and prime the back of it while it is unbolted and then put the new cab supports and bolt it down.

01-26-2004, 01:12 AM	#1
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	wish me luck also tommarow morning i am going to do my first engine pull on my own, i am going to transplant my 350 from my 71 c/20 to my newly aquired 67 gmc, while i am at it i also have some ?s is it safe to pull the engine and tranny all at once what should i do before doing this. since i am doing this on my own i thought about taking the hood hinges off of the front clip and unbolting it from the truck and use the engine hoist to lift off the front clip, would i be able to do this. I am also going to scoot the cab forward and prime the back of it while it is unbolted and then put the new cab supports and bolt it down. __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.