Front Discs will not engage

[Bare64]

Here is what I have found (done) so far:

1. Went ahead and ordered a new proportional valve due to rod being stuck, do not want sister getting into a bad situation if rod sticks again and she has no brakes. I can get this valve in "fixed" and "adjustable", which would you guys recommend?


2. Bought a Master Cylinder Bench Bleeder Kit

3. Question about this angle on the Master Cylinder, seems pointed up way to high:


4. I am thinking who ever installed the bracket installed it upside down, it seems the master cylinder would be about parallel if the bracket is rotated 180 degrees, right?