Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-03-2015, 05:00 PM | #1 |
Registered User
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,772
|
Turn Signal Hook up Question
I'm going to try to write this up as simple as I can, hopefully someone can help me figure this issue out.
I have the 21 circuit E-Z wiring kit, no complaints with it at all. I have a OEM column with factory turn signals and the factory plug mounted in the coumn. There is a hard/stiff wire that is connected to the turn cam that is connected to the plug shown on the back side of the plug. The E-Z wiring harness has two wires marked Right Turn Ind. and Left Turn which connect to the dash mounted green LEDs. What I can figure out is how do I connect the topsideof the plug to the block to make the circuit? I've reached out to E-z and I think they are stumped as well. I no longer have the female plug (I cant remember if I ever had one or it was just wires). I can't be the only person to have hit this wall, so any ideas and help will be appr,. Jake
__________________
http://s1299.photobucket.com/user/jb...23904108567829 |
Bookmarks |
|
|