Need measurement on AD bed please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chuckmc8 · 02-28-2015, 06:09 AM

I have a 53 AD truck- Im working on donor rear diff and could use a measurement please. I have an S10 frame (just for info)

I don't have a bed yet.

What I plan to do put some tape marks on my shop floor and put my desired wheel/tire combo within the tape marks and determine the rear end width.

So I need to know the measurement of the distance from the inside of the fender lip (where the outer side wall would scrub) to that same point on the other side. Or in other words, the maximum width of the differential with tires that would still fit inside the stock rear fenders.

Make sense? Any help would be appreciated

02-28-2015, 06:09 AM	#1
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Need measurement on AD bed please I have a 53 AD truck- Im working on donor rear diff and could use a measurement please. I have an S10 frame (just for info) I don't have a bed yet. What I plan to do put some tape marks on my shop floor and put my desired wheel/tire combo within the tape marks and determine the rear end width. So I need to know the measurement of the distance from the inside of the fender lip (where the outer side wall would scrub) to that same point on the other side. Or in other words, the maximum width of the differential with tires that would still fit inside the stock rear fenders. Make sense? Any help would be appreciated __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.