another sheet metal question.

[WEBBY1]

The floors in my burb are shot.. from the firewall to back basically.. inner/outter rockers are missing or just about rotted out along with the cab mounts.. I wanna make sure I order the right stuff the first time. I know I will need to rework the passenger Side because of the step. Are these the right floor pans? http://www.topbananaparts.com/driver...floor-pan.html

I've read these are for the inner rockers and also have the backing plate attached to them http://www.topbananaparts.com/driver...r-section.html

These for the other rockers http://www.topbananaparts.com/driver...ker-panel.html

Am I going to need these? I'm redoing the WHOLE floor.
http://www.topbananaparts.com/driver...r-section.html

Since my cab supports are completely gone this would be ghee replacement correct? http://www.topbananaparts.com/oem-st...support-1.html do these attach/weld to the inner or outer rocker?
Also... I was told there is a piece that connects the inner/outer rocker together in the front and the bottom part of the fender bolts to this piece? Can anyone shed some light?

Let me know if something is better then what I posted.

Thanks in advance I cant wait to get this thing on the road