"Brass Monkey".....Installing 4/6" ECE Drop Kit

[Coursey]

Originally Posted by BenjaminEWright

Hey... How's it going? Love the truck! I've got a few quick questions. How do you like the front sway bar on the truck? I'm doing the exact same drop. Working on the front at the moment and I've got the ECE front sway bar to put on too. Don't like the instructions but guess I'll learn where to place it... What size are your Rally wheels? 15x8's? Also how do you like the 245/60/15 and
275/60/15 BFG Radial TA's? Do they rub any? Sorry for all the questions. I'm trying to do this all right as I'm still in high school and don't want to spend money so much money whenever I could have done it right the first time!

Thanks!

Questions are always welcome. That's how you learn.

Unfortunately i have only drove it about five miles since it was done. It went straight from alignment shop to the paint shop. What little i drove it i was impressed with the lowering kit and sway bar.

Look a few posts back and i have a picture of the correct way the sway bar goes in. Easiest way for me to get the factory rivets out is to cut an X in the top of the head and knock it off with an air hammer.

The tires fit well. No rubs at all. It does create about 3/4" tire rake using this setup.

I have 15x8's all around. Alot of people run a 7" front, but 8" is what i had and couldn't see buying new ones. They fit good and have no clearance issues.

Good luck on the build!
Start you a build thread and post up plenty of pictures.