Ls1 white smoke :-(

[ACII]

Hy all,

after the ls1 swap was done , i did my first test ride today.

Unfortunately i recognized that there is a lot of white smoke (maybe also a bit blue , hard to say)

At idle there is almost no smoke, but at acceleration the engine starts to smoke a lot ....

After the test ride a made a short video ...so u can see the white smoke at smashing the gas pedal...

I got the engine of a Z28 camaro....i just bought the car for the swap..
Before i bought the camaro i made a test drive and there was no smoke.
Also on the highway back home i couldnt see any smoke...also at hard acceleration..

So now i am pretty wondering why the engine is smoking ! ???

At the swap i eliminated the egr system.

Also i reduced the lambda on two sensors... also no catalyst in the exhaust system

The pcm is programmed for the swap...

The fuel pressure is around 4 bar.


During the installation of the new air filter setup and checking the throttle body , i recognized that there is some grease inside of the intake manifold.
Looked like some oil grease...
Maybe the PCV system is not working correctly anymore....and the engine burns oil through the intake manifold ?

I read some articles on the internet ...it looks like its a common problem on the LS1 !!

What do u think ??

And how can i check the pcv system ??

Thanks a lot for ur help ....

CU
Achim
and sorry for my poor englis again