Panhard Bar Bushing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Paul Mitch · 06-23-2015, 12:42 AM

I have a 65 C10 with a c-notch and air ride suspension.
I installed an adjustable Panhard bar, set the truck at a comfortable ride height and adjusted the bar to that length and installed it. I use this truck as a truck as well as a cruiser. I noticed the truck starting to shake recently and got underneath it. I noticed the panhard bar (on the pumpkin side) bushing had disintegrated. Does anyone have any insight as to what might have caused this? It was a rubber bushing.
Thanks
Paul

06-23-2015, 12:42 AM	#1
Paul Mitch Registered User Join Date: Sep 2014 Location: Clayton Ca Posts: 22	Panhard Bar Bushing I have a 65 C10 with a c-notch and air ride suspension. I installed an adjustable Panhard bar, set the truck at a comfortable ride height and adjusted the bar to that length and installed it. I use this truck as a truck as well as a cruiser. I noticed the truck starting to shake recently and got underneath it. I noticed the panhard bar (on the pumpkin side) bushing had disintegrated. Does anyone have any insight as to what might have caused this? It was a rubber bushing. Thanks Paul



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.