|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
07-02-2015, 09:33 PM
|
#1 |
|
Registered User
 Join Date: Feb 2015
Location: Belmont Ontario Canada
Posts: 418
|
63 Control Arms to 73-87 Spindles, Finally!
Hey guys here's the part numbers you need....
Upper BJ k6186 moog # Lower BJ 505-1021OS Raybestos (tacked in and lip hammered in a bit) Outer Tie Rod Es409RT Inner Tie Rod ES323L Sleeve from POL OR ECE to match the rods. This will work very good if you happen to have 73-87 spindles lying around or the ECE group has spindles that match the 63 ball joint tapers... The Control Arm alignment hole goes to the front on my 63 here is the final result with 3" drop spindles and 1" drop springs ...also new larger LCA u bolts. |
|
|
| Bookmarks |
|
|
Threaded Mode