PA Rebuilt powdercoat hatch hinges - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1rippen6** · 07-12-2015, 09:45 PM

I have 4 sets of hatch hinges 3 in white and 1 in black. I used new bushings and tried to use original pins if nice enough some were worn to bad and had to be replaced with ones that don't look original. The powdercoating was done by a friend of a friend and it is not that good he left light spots at the hinge joint so I don't know if they can be touched up or not I know nothing about powdercoating. I will sell for 55 shipped a set. I will try and get pictures of the light spots tomorrow and add to the thread.

ALL SOLD

07-12-2015, 09:45 PM	#1
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,811	Rebuilt powdercoat hatch hinges I have 4 sets of hatch hinges 3 in white and 1 in black. I used new bushings and tried to use original pins if nice enough some were worn to bad and had to be replaced with ones that don't look original. The powdercoating was done by a friend of a friend and it is not that good he left light spots at the hinge joint so I don't know if they can be touched up or not I know nothing about powdercoating. I will sell for 55 shipped a set. I will try and get pictures of the light spots tomorrow and add to the thread. ALL SOLD Attached Images Last edited by 1rippen6; 10-29-2015 at 07:45 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.