![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Dec 2003
Location: Left Coast
Posts: 254
|
Pictures of two into one exhaust
I'm using Brzyzinski Racing's two into one exhaust collector and mandrel bent 2.5" pipe from ported (to a 1404 Fel-Pro gasket) Corvette Ram Horn manifolds.
Here is a picture of the passenger side exhaust from the collector to just in front of the transfer case cross member ![]() Here is the same pipe turning in front of the transfer case and getting ready to join into the collector ![]() Here is a picture of the 2 into 1 collector. I have a band clamp on the bottom pipe and will be putting one on the top as well. This will allow me to dis-assemble the system easily for any maintenance. ![]() This is the 2-1 leading into the muffler (dynomax ultra-flow rv muffler) ![]() Here is a picture from behind the transfer case ![]() Here is the drivers side ![]() This is from the transfer case crossmember forward ![]() Here is a picture of the beast (sorry for the mess) ![]() ![]()
__________________
Toys: 72 K5 Blazer 74 Vette Last edited by skid; 02-14-2004 at 09:45 PM. |
![]() |
![]() |
Bookmarks |
|
|