Drop Suspension parts

[UKNOWME]

Originally Posted by Burmanater

I've got an old set of 5 hole circle track style rims that are 15x8 with 4 inches of backspace but with the dish in the rim center it puts the backspace closer to 5 inches. The lip of the rim sticks a 1/4 inch past the outside of the fender lip.

I've got some old Bullett drop spindles and factory coils that Im almost positive are not cut. There is 3/4 to an inch of shims in the upper a arms to take the negative camber out. This thing was dropped back in the day and crudely at that but it sits the way I want.

I have to use the rims ive got cause well they're perfect and I've never seen a square with a set which would be kind of nice. Just wondering which companies make narrowed track a arms or I'm going to remove the shims from the uppers and narrow the lower to bring the track in to where I think it should work.

http://michiganmetalworks.com Contact them or you could have someone modify yours if they have the skills.