Engine and Trans Crossmember?

[Tod59]

Hey Guys,

I want to convert my 59 from a 6 cylinder 3 "on the tree" to a sbc v8 and an automatic (350 or 400 turbo). Brothers Truck Parts offers a V8 engine and tranny cross member kit for this installation.

Question: I assume that I will have to weld the ends of the tube to the brackets that attach to the frame for both pieces? How will I know what rotation (angle) to use and weld the brackets accordingly? I don't have a V8 yet or a tranny.

Does someone else sell the cross members that are pre-welded to a fixed angle? I have good welding skills as far as welding the brackets to the frame....I'm more concerned about messing up the angle and welding it in the wrong position.

Also, how will I know where to weld the engine cross member to the frame? Are there measurements?

Any advice is much appreciated.

Thanks
Tod