01-14-2016, 02:12 PM | #1 |
Registered User
Join Date: Apr 2014
Location: Bridge Creek , Oklahoma
Posts: 69
|
Lq4 swap in 70 c10
Well I have read alot of the threads you guys post and I finally set my Lq4 into my frame and I have got a couple question for you guys who had done this alot.
So what I have the are cpp sheet metal towers and I am using ploy motor mounts with Lsx innovation adapter plate. For the transmission it is a 4L80E and I'm using the pol tubular crossmember with the poly transmission mount. So my question what is the degree the motor and transmission supposed to set up and where are you taking the degree measurement from. My frame is setting level on jack stands with the motor and transmission in it nothing else so what I did is I took the degree measurement of the bottom of the transmission pan and the bottom of the oil pan . I'm getting almost 2 degrees on the motor I'm also getting almost 0 degrees on the transmission pan and I'm getting 0 degrees on my frame since its level |
Bookmarks |
|
|