'64 C10 steering help needed

[Bob_wuzza]

Posting in the original thread didn't bring it up from the grave so new thread!
Heres the original thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=643466

Hello again Guys,

haven't posted in a while but kept hovering around.
I have a few new problems to deal with and need some help.

I broke my manual steering box while hunting and I can't find everything I need anywhere.

I'm trying to do it on the frugal side ( work is slow right now )
So unless you guys know of a better way of doing things I'm looking at

#1 Finding a rebuild kit

The ball bearings/ U channel and the steering shaft work fine so all I would NEED is the bearings, 2 seals and the bushings.
I took what was left of one of the bearings to a bearing shop and they had nothing to match.
I found the seals on rock auto
I checked NAPA and classic industries with no luck

I found these look right but not sure if they would fit and no
way to check
http://www.ebay.com/itm/1963-1982-Co...-/321966083651
http://www.ebay.com/itm/Full-Size-Ch...-/181995907921


2nd option is finding a rebuilt box but what's the fun in that? Its expensive with the Canadian dollar and the core charge.

3rd option is mounting power steering
I have access to a working power steering box, all I'd need is the pump/reservoir and possibly a mounting bracket. Captainfab seems to be the man to talk to

here are a few pics