03-27-2016, 12:15 PM | #1 |
Registered User
Join Date: Apr 2014
Location: atlanta ga
Posts: 91
|
Fuel lines ?
alright,
have the old 350 out of our '76 K-10 and am looking for fuel line advice. we have been ruing the tank from a 1987 as we were running TBI, so we plan to swap the EP381 pump into the tank, then what? the fittings on our sending unit are barbed for a slip on rubber hose. do we need to have a shop weld on 6AN threaded fittings? Ive used the rubber EFI hose and barbed fittings with 2 EFI clamps on the lines on my 74 Bronco with a 1990 mustang 5.0 EFI for almost 15 years with no issues and I think it has only slightly lower pressure. and what are yall using for the supply and return lines? engine is a 2001 drive by cable with a supply and a return line on the rail I assume the TBI return line we be ok to use since its no pressure? anyone using this supply line? http://www.summitracing.com/parts/su...commendedparts any tips on installing the fittings on the ends? Last edited by roundhouse; 03-27-2016 at 12:22 PM. |
Bookmarks |
|
|