Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
05-31-2016, 05:12 PM | #1 |
Registered User
Join Date: May 2016
Location: Romulus, NY
Posts: 66
|
86 C20 Slow build "Chuck"
Hey all, figured I'd put up a build thread. I'm usually very slow when it comes to builds but I'll be updating the thread.
Picked up an 86 c20 with 155k miles on it for a song, no dance required! $350! Got it home and put a new ignition switch in since the P.O. lost the key. Last registered and inspected in 03, he says it was last driven about 5 years ago. Hooked it up to a gas can and plugged up all the vacuum leaks and voila! It starts first crank now! Floor pans are very bad (almost not there) so I will be looking for a cab at some point. It'll be a good truck though! 350 with a quadrajet, sm465 4 speed, P.O. said it has 2.73 gears but I think he meant 3.73, i'll check the codes today. I need a voltmeter and an oil pressure gauge, P.O. put them in his other truck. I drove it off the car dolly, but the front brakes are partially locked up. I also have a brake light on in the dash so maybe the prop valve is just stuck closed? We'll see.
__________________
1997 ECSB K1500: 350; NV4500; 3.42's; 14 Bolt SF; 0411 ECM; 3/4-ton Calipers; Hydroboost; 3500HD Door Handles; 32x11.50x15 Cooper STT's on OOBS Rallys Plans: 4.10s, 33's, 4" Lift, Urethane Bushing Kit |
Bookmarks |
|
|