06-12-2016, 12:03 AM | #1 |
Registered User
Join Date: Sep 2013
Location: Vashon WA
Posts: 969
|
Brake issue 59 2ton
I'm having problems with my rear brakes on my 1959 Viking 60
after I drive the truck for a while the rear drums start to drag. There were all new parts Hydrovac,( vacume asst) Master cylinder( single) New Lines,Shoe's, Springs, Wheel cylinder's (2 per side) at first I adjusted them so they had a slight drag on both rear wheels and they would lock up after a while . I backed off the shoe's so I would have no drag still if I drive for a few miles they would get hot like there dragging. When I removed the drums and pump the brakes the cylinders move as should Removed wheel cylinder took them apart and they look clear. . It's all stock and has the parking brake drum type is on back of transmission not on rear Wheel's . I've bled the brakes starting at hydovac then wheel cylinder's . I'm stumped.......? . . . Here's some picture when I first put the brakes together . . . . Took these Today . Driver Side . . Pass Side . . .
__________________
My Spelling is Not Incorrect...It's 'Creative' . . 1966 C-20 .....Swap 91 G-30(5.7 FI)/4L80E http://67-72chevytrucks.com/vboard/s...d.php?t=789617 59 Viking Revival .. http://67-72chevytrucks.com/vboard/s...d.php?t=632341 |
Bookmarks |
|
|