Turbo 350 4x4 Strut Rod Braces - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76/85 Truck · 02-08-2017, 01:21 AM

Hello! In the process of building a turbo 350 for my 76 Chevy K20. The bellhousing cracked completely off of the transmission that used to be in it.

I keep hearing about rods that bolt from the lower transmission bell housing to the engine block. When I bought this truck, it had no supporting bars on the transmission or transfer case.

It has an NP205 if that helps. Any ideas of where to find these rods or pictures of said rods? Trying to avoid breaking another transmission. Thanks in advance!

02-08-2017, 01:21 AM	#1
76/85 Truck Registered User Join Date: Jun 2010 Location: Libby, MT Posts: 163	Turbo 350 4x4 Strut Rod Braces Hello! In the process of building a turbo 350 for my 76 Chevy K20. The bellhousing cracked completely off of the transmission that used to be in it. I keep hearing about rods that bolt from the lower transmission bell housing to the engine block. When I bought this truck, it had no supporting bars on the transmission or transfer case. It has an NP205 if that helps. Any ideas of where to find these rods or pictures of said rods? Trying to avoid breaking another transmission. Thanks in advance! __________________ Rich My first truck!! 1976 Chevy 3/4 ton Camper Special and a 1985 GMC body. Has a 350, 4 BBL Edelbrock, with a Turbo 350, and NP205 T-case.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.