|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
03-31-2004, 08:52 PM
|
#1 |
|
Registered User
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
|
just dropped heads off.......
..........at kendrick machine shop in san antonio. they have done several sets of darts before. they said they usualy flow 255 cfm out of the box and they should flow close to 290 cfm when they are done with them
 you usualy figure 2 hp per increase of one intake cfm. so do the math.............. 
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's |
|
|
| Bookmarks |
|
|
Threaded Mode