|
06-27-2001, 10:58 PM
|
#1 |
|
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,672
|
weird susp. prob
I recently conv. to 77 disk using the 67 crossmember and 77 spindles, a-arms, etc. This past weekend I cut the coils some more hoping to cure my prob but still have it. It is this: the coil is seated correctly, yet is rubbing inside the pocket on the crossmember. It is sitting somewhat at an angle on both sides. I cut both equally; I seated pigtail side correctly-also the cut end in pocket dip. This is annoying-help!
have close to 5" drop if this helps. ------------------ 68 Camaro,250(No,I'm not putting in a 350!) 67,LWB,250(Again, I'm not putting in a 350!) a work in progress "Praise The Lowered" Bend, Or (for the summer) [This message has been edited by Brad (edited 06-27-2001).]
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
|
|
| Bookmarks |
|
|
Threaded Mode