MO 250 cu. in. I6 parts for sale

[Clatterville trolley]

I pulled the six cylinder engine out of a 1967 parts truck I had to make it easier to remove the cab for another project. I had always wondered if it was reusable or not, so I disassembled it.
Block was cracked in two or three places. Therefore, I decided to offer up some of the good parts to help out anyone rebuilding one of these.

The list of parts:

• Crankshaft - looks good haven't put a mic to it, but everything shiny with no galling or hot spots, etc. $50 plus ride
  Exhaust manifold with free moving heat riser. $40 plus ride
  Intake manifold with heat tube, carb., linkage. $55 plus ride
  May also have an air cleaner if it is correct one - you identify $35 plus ride
  Clutch cover tins (had 3 spd. trans.) $20 plus ride
  Flywheel with good starter ring - no buggered up teeth. $30 plus ride
  Clutch housing for standard shift trans. $45 plus ride
  Clutch throw out arm. $15 plus ride
  Harmonic balancer. $20 plus ride
  **SOLD**Extra belt pulley that bolts to balancer - has slight ding, but can be straightened easily?

Anything that you are interested in but want to make an offer - offer away!! Not starting a museum, intend to sell these. Thanks for checking my ad.

Will try to get some photos in the next couple of days. Jay