67 ignition switch and bezel install

[19SWB67]

I've decided to redo the wiring on my truck due to the horrible job the previous owner did. While I'm doing so I decided to redo the ignition. The previous owner installed a tilt column from a later model which meant that the ignition was no longer on the dash. He instead installed a push button in its place. I ordered a whole new setup from LMC with all the correct year model parts. The switch, the spacer, the cylinder, and the bezel. When I went to mock it up I noticed that the distance from the spacer to the bezel was too far, meaning the bezel wouldn't reach the spacer and switch. Now my truck is a 67 and the bezel I ordered shows to be the correct one for 67. The dash hasn't been altered where the ignition was originally. And ideas outside of ordering the 68-72 bezel and seeing if it corrects the issue? If pics are needed for any clarification I can provide.

William