Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
08-09-2017, 12:14 PM | #1 |
Before and After
Join Date: Feb 2000
Location: Leduc, Alberta CANADA
Posts: 632
|
5.3 swap into 72 C-10 Part list.
So i have searched the threads, but didn't get all the answers I needed. Can you help me??
I have a 5.3 /4l60E to replace a inline 6 250 / 3 speed Manual on another project. Correct me if I am wrong: -I will need to use V8 motor mounts before I use the LS adapter plates. -is it better to move the engine more forward to have clearance at the firewall? or will there be clutch fan issues if using factory fan? -will 73 up motor mounts work better for this application? -will I need to replace the oil pan with a smaller one? i will be planning on lowering this truck quite low, I do not want it to be damaged. -are there any headers that fit nicely in between the frame rails/ motor mounts? -A new transmission cross member will be needed. -I have the donor trucks crossmember, although it is for a 4X4, which I will not be using since i will have a 2WD. would it make sense to modify that to fit or build from scratch or is there another possibility?
__________________
Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA |
Bookmarks |
|
|