Crankshaft Bearings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cfan10 · 08-20-2017, 10:25 PM

Is it possible to replace crankshaft bearings with the engine still in, I was told to change the bearings if connecting rods are in good condition polish crank with fine sandpaper. Change oil 10w-30 diesel oil, replace oil pump and that may last a while.
I was told this by an old shade tree mechanic who's yard is like a time capsule of old parts trucks, after I explained that I'm saving to buy an ls (low miles) and really don't want to buy another sbc, not like these are common at yards.
As always thanks for your advice...it is greatly appreciated!

'84 c10 305 v8/th350

08-20-2017, 10:25 PM	#1
cfan10 Registered User Join Date: May 2011 Location: Texas Posts: 984	Crankshaft Bearings Is it possible to replace crankshaft bearings with the engine still in, I was told to change the bearings if connecting rods are in good condition polish crank with fine sandpaper. Change oil 10w-30 diesel oil, replace oil pump and that may last a while. I was told this by an old shade tree mechanic who's yard is like a time capsule of old parts trucks, after I explained that I'm saving to buy an ls (low miles) and really don't want to buy another sbc, not like these are common at yards. As always thanks for your advice...it is greatly appreciated! '84 c10 305 v8/th350 __________________ Rest In Peace:Mikhail {Mickey Rooney} Alpha 2/5/13 Omega 7/22/14 10:28AM I love you tremendously and outragiously Superpuppi Thai Ridgeback...The most intelligent dog known to me. Don't mess with my truck, my momma or my money...not necessarily in that order. © Stand for something or fall for anything. [LIST][]'98 Bourbon St. Brawl ©2010 Last edited by cfan10; 08-21-2017 at 05:09 AM.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.