Mounting a stock truck air box

[LeesTruk]

A fellow member asked how I mounted a stock Chevy air box in my C10, so here's some pic's. My truck is not a show piece and does have some rust, although some prefer to call it patina. I trimmed the side of the stock battery tray to allow for fitment of the box, and to allow the inlet of the box to be pressed against the opening in the inner fender structure. I fastened a piece of aluminum angle to the tray to act as a mounting shelf and a place to fasten the box to the tray. The "acordian" rubber tube will stretch, to allow for difference in distance from the throttle body to the MAF sensor