|
04-25-2004, 12:58 PM
|
#1 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
73-87 crossmember ?
I have picked up a later crossmember to notch & drop the nose of the longhorn another 1" -1 1/4". From reading a few threads on the swap, I remember that a couple bolts dont line up on the 67-72's.....Can anybody tell me which ones , before its all apart? all the side holes will need to be redrilled after the notch, so my main focus is on the 3 bottom holes on ea side. Thanks, crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
| Bookmarks |
|
|
Threaded Mode