![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#19 |
Registered User
Join Date: Feb 2014
Location: Dallas Texas
Posts: 61
|
Re: 700R4 back to a 3 speed
Looks like the crossmember is still there and riveted in place to put the original bellhousing back in.
Found the original fork for the clutch. So, far I have a complete bellhousing, flywheel and rebuilt 3 speed for 110 dollars. Found the linkage and column for another 175 if I decide to go that way. Then I would need a driveshaft, clutch, and bellhousing mounts. With a little luck I could find a 3:07 rear end or adapt a R10 or R11 tailhousing on to my Saginaw box and be good to go. I also have a 90’s Camaro T5. It has the Ford pattern mount to the bellhousing and the wrong tailhousing, but has the longer input shaft, so I could make an adapter/spacer plate easily on the lathe and mill, and adapt a mechanical s10 tailhousing. And then I would just need to buy a clutch. Last edited by Big John Sny; 01-25-2018 at 07:29 PM. |
![]() |
![]() |
Bookmarks |
|
|