Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-13-2018, 11:43 AM | #11 |
Registered User
Join Date: Mar 2016
Location: Cbus, Ohio
Posts: 290
|
Re: '78 K20 to C10. Almost 20 years in the making.
I decided to try and use the mechanical trans linkage kit work as I wasn't sure the cable shifter would fit on my column.
I had a friend weld an extension onto the stainless rod that came in the kit. I made a rough template of how I wanted the linkage to route from a hanger. I then used some map gas and the vice to bend the rod. After a couple adjustments I came up with this. It works really well, surprisingly. I wasn't sure it would work right with the bends and heim joints but it does. So that's done. . I spent 2 hrs fixing the brake line leak in the rear of the truck. I had to use an inline flare kit and the old bar clamp style vice-gripped together to keep the line from slipping through the clamp. Eventually it was done and sealed. I replaced the hose as well as it was distorted from me overtightening the goofed up flare. . Right now I'm working on rewiring the dimmer switch and the wiper switch. I'm just extending the dimmer wires and cut the connector down and it plugs right in. I ordered a wiper delay module and then Ill be cutting the factory cab side connector off and wiring the existing wires to the connector on the delay module. Last edited by cruizin01; 02-13-2018 at 11:51 AM. |
Bookmarks |
|
|