68 C10 Front Disc 5 lug conversion

[WhiteCST]

Originally Posted by Mike C

I have the ECE 4.5" disc conversion on my 69. 2" springs. I will be getting ANOTHER set of 2" big block springs when I do that swap.

In the rear I have a DJM leaf spring flip that netted about 7" drop. I did not C-notch and mostly it is not a problem. I put the small (3/4"?) urethane bumpstops on the frame and that mitigates most of the impact. With just 6" drop I'm thinking you will have no (or small) issues.

This is what I was hoping to hear. I really do not want to notch and if I do I’d have to go the expensive way instead of bolt on. My truck has the trailing arms and coil springs so hopefully it’s the same.