Hooker LS Turbo Manifold - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jrpontiac · 08-28-2018, 11:37 PM

Started my 5.3 turbo setup in my 77 c10 and wanted to post that the Hooker Turbo manifold fits a c10. It is very close and need a small amount of grinding here and there. Just wanted to post this so if people search in the future they can find it. Before ordering I called Hooker direct to see if they knew if it fit. They had no idea. You have to unbolt the passenger side motor mount and jack the engine up a few inches to get it in.

The grinding was on the clam shell mount mount portion. All else clears. I suspect with different motor mounts it would all clear.

08-28-2018, 11:37 PM	#1
jrpontiac Registered User Join Date: Nov 2017 Location: spokane, wa Posts: 122	Hooker LS Turbo Manifold Started my 5.3 turbo setup in my 77 c10 and wanted to post that the Hooker Turbo manifold fits a c10. It is very close and need a small amount of grinding here and there. Just wanted to post this so if people search in the future they can find it. Before ordering I called Hooker direct to see if they knew if it fit. They had no idea. You have to unbolt the passenger side motor mount and jack the engine up a few inches to get it in. The grinding was on the clam shell mount mount portion. All else clears. I suspect with different motor mounts it would all clear. Attached Images __________________ 1977 Chevy C10 SB, Turbo 5.3ls, TH400 Last edited by jrpontiac; 08-29-2018 at 10:18 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.