|
10-16-2018, 11:30 AM
|
#13 |
|
Registered User
Join Date: Sep 2016
Location: No Where,KS
Posts: 57
|
Re: 1977 GMC CCDW build
So last night I got down to the shop to work for awhile since the cable kit showed up finally. Found out how much the TPS bracket I made wasn't going to work lol so more cutting and some bending has everything working now. its too bad no one makes a cheap bracket for the QJet everything is $130-$150 on the market and I just don't have the funds lately. Still need to finish drilling the holes for the crossmember and finish up the linkage.
photo of the driveshaft Local shop needed the middle of the support bearing mount to the back of the transmission (37" with yoke in) then took out 1 inch boom 36" driveshaft with a new u-joint and slip yoke installed.
__________________
1977 GMC Sierra Classic CCDW. 454 worked 781s, 277/287, Lift .502/.501 LS 114, Dual plane intake, Dana 70 (4.10) and 4L80e (HD2 kit).  http://67-72chevytrucks.com/vboard/s...63#post8361863 |
|
|
| Bookmarks |
|
|
Threaded Mode