hydroboost unit fitment ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sweetk30 · 10-31-2018, 07:51 PM

i see there is specific part #'s for these .

i have a real clean uni from a c-10 diesel truck with good hoses .

want to swap it in place of my NASTY / RUSTY / READY TO POP lines unit i was going to use from old truck to new .

i dont recall much of any info on how there different from each other . there both from 80's gm trucks .

anyone know the difference or if you have a 1/2 ton unit on a k30 with k30 master and no problems.

i have a new master to install on the unit when i install a good non rusty/crusty unit .

10-31-2018, 07:51 PM	#1
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	hydroboost unit fitment ? i see there is specific part #'s for these . i have a real clean uni from a c-10 diesel truck with good hoses . want to swap it in place of my NASTY / RUSTY / READY TO POP lines unit i was going to use from old truck to new . i dont recall much of any info on how there different from each other . there both from 80's gm trucks . anyone know the difference or if you have a 1/2 ton unit on a k30 with k30 master and no problems. i have a new master to install on the unit when i install a good non rusty/crusty unit . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.