Ls oil pan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nick_c10 · 12-15-2018, 12:04 AM

About to install a 04 5.3 Truck LS in my 68 stepside and was told the oil pan will fit but will hang too low for a lowered truck. Anyone know if the f-body pan will work? I can tell by looking at it that it will be short enough but the lower sump part is longer and I’m not sure if it will clear the cross member. I’d like to hear from someone that has installed it on their swap before I spend $300 on it off eBay. I’ll be using dirty dingo mounts. Thanks.

12-15-2018, 12:04 AM	#1
Nick_c10 Registered User Join Date: Jan 2015 Location: Rapid City SD Posts: 31	Ls oil pan About to install a 04 5.3 Truck LS in my 68 stepside and was told the oil pan will fit but will hang too low for a lowered truck. Anyone know if the f-body pan will work? I can tell by looking at it that it will be short enough but the lower sump part is longer and I’m not sure if it will clear the cross member. I’d like to hear from someone that has installed it on their swap before I spend $300 on it off eBay. I’ll be using dirty dingo mounts. Thanks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.