Another Lowered LS Oil Pan Question for the Newbie

[Worldofhurts]

I have a 67 C10 Short bed lowered 5" in the front and 7" in the rear. I have an LQ4 6.0 from an 05 Silverado. I planned on using the factory AC that is lower mounted. I purchased an LS Swap kit specifically for the AC from CPP. Here is my dilemma I purchased a camero oil pan part number 12628771. I installed the motor and tranny but don't have enough clearance to lower/tilt the tranny on to the tranny mount/cross member without the oil pan from hitting the crossmember. I would like to make what I have work since I already have money and time involved with the camero pan since I polished it so i'm open to suggestions. If I have to get another pan to get it to work with the stock AC mounted low then it is what it is but I someone has part numbers for the pan,windage tray, pick up tube and dip stick that would be awesome.