Air Intake, what are you guys using on your swaps?

[Wgesnerjr]

Originally Posted by Rich84

Is that a kit for a Silverado? How tight is that elbow? I had to remove my upper shroud because there is not enough room with the factory setup. My engine is slid forward to allow room for the A/C in the lower position. D.D sliders almost all the way forward.

It does say fits Silverado. The elbow is tight on one side so you have to be sure you orient it correctly. Here is the pic of it near the fan. I dont know what mounts I have so cant confirm engine placement. I have about an inch clearance between elbow and fan.